Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Lighthouse Point, FL
Most chimney work we do in Lighthouse Point is repair, not sweeping. The town is nearly all single-family homes, many of them 1950s to 1970s ranch and Florida-style houses along the Intracoastal and the canals, and the fireplaces inside them get lit a handful of nights a year at most. What ages in a flue like that is not creosote. It’s the cap, the crown, the damper hardware, and the masonry around them, all taking a steady dose of humid salt air and storm-driven rain. We repair what we find: caps, crowns, flashing, liners, and the parts that keep water and wildlife out of a flue that sits idle most of the year. Our technicians have up to 10 years of experience. Call (866) 361-5813 and we’ll set up a visit.
Why Lighthouse Point Homes Are Different
Chimney problems here are moisture problems first. The subtropical marine climate keeps humidity high year-round, and the salt-laden air moving off the Intracoastal and the canals does a number on metal dampers, caps, and the fasteners holding them on. Rust shows up long before creosote ever becomes a concern. Add intense summer thunderstorms and hurricane-season wind-driven rain, and an unused flue becomes a funnel for water that works into the masonry and the firebox.
The housing stock reinforces it. These are largely masonry fireplaces in homes built between the 1950s and the 1970s, and the caps and crowns that went up with them have had decades of coastal air to degrade. A crown that cracks lets water straight into the chimney structure; a cap that rusts loose lets in rain and gives birds and raccoons an open door. In a town where the fireplace is decorative more often than it’s used, the typical call is a homeowner who found rusted damper hardware, a cracked crown, or a nest after months of an unused flue. That’s why inspection, cap and crown repair, and moisture control carry the load here rather than routine soot removal. If you’re wondering whether a chimney sweep in Lighthouse Point is even the right first step, the answer usually comes down to what an inspection turns up.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Lighthouse Point Services
Two services account for most of the calls we get from Lighthouse Point homeowners: cleaning out a flue before it goes back into use, and clearing the dryer vent, which is the other exhaust line in the house that quietly loads up with lint.
Chimney Sweep in Lighthouse Point
A sweep here is a full look at the flue, not just a brush and a bill. We run a camera, photograph what we find, and show you the interior of the chimney so you can judge the condition yourself. In Lighthouse Point that often means documenting rust on damper hardware, staining that points to water entry, or a nest in an off-season flue rather than heavy soot. With the coastal air and long idle months, a yearly look keeps small moisture problems from turning into masonry repairs. Nobody recommends work you can’t see the evidence for. Book a Chimney Sweep in Lighthouse Point before the next season you plan to burn.
Dryer Vent Cleaning in Lighthouse Point
Lint builds up in the vent line the same way creosote builds in a flue, and a clogged dryer vent is a fire risk in the same house. We pull the line apart, clear the run to the exterior, and check the damper and termination for the corrosion that coastal humidity causes. In single-family Lighthouse Point homes the vent often runs a long path to an exterior wall or the roof, and every bend collects lint. It’s fire-safety maintenance, not an add-on, and it belongs on the same yearly rhythm as the chimney. Schedule Dryer Vent Cleaning in Lighthouse Point with the sweep.
Chimney Repair in Lighthouse Point
Chimney repair in Lighthouse Point is mostly about stopping water and holding the structure together. In homes built from the 1950s through the 1970s, the masonry fireplaces have crowns and caps that have spent decades in salt air and driving rain, and rusted dampers are a common find. We handle this side of the work with Chimney Repair across the city, from caps and crowns to flashing and full relining, using professional-grade materials rather than hardware-store parts.
Chimney Cap Replacement
Signs you need it
Rust bleeding down the cap, a cap that’s loose or missing fasteners, or a flue that stays wet or fills with nesting material after the off-season are the usual signs.
What it costs in Lighthouse Point
Cap replacement typically runs $250 to $650, with custom or stainless upgrades running higher, and the written estimate fixes the final price.
How we do it
We remove the old cap, inspect the flue top while it’s exposed, then fit a correctly sized replacement – often a Gelco or Copperfield unit – and seal it against wind-driven rain.
Chimney Crown Repair
Signs you need it
A visible crack across the crown, crumbling concrete at the top of the chimney, or staining and damp patches on the masonry below it all point to crown damage.
What it costs in Lighthouse Point
Crown repair typically runs $350 to $900, and a full crown rebuild sits at the higher end of that range depending on size, with the final figure set by the written estimate.
How we do it
We chip out the failing concrete, clean the bond surface, and pour or form a new crown with proper slope and overhang so water sheds away from the flue instead of into it.
What Chimney Repair Costs in Lighthouse Point
These are typical ranges for this market, not a quote. The written estimate you get before any work starts is what sets the final price.
| Item | Typical range in Lighthouse Point |
|---|---|
| Chimney cap replacement | $250 – $650 |
| Chimney crown repair | $350 – $900 |
| Chimney flashing repair | $300 – $800 |
Can you repair a chimney crown without a full rebuild?
Often, yes. If the crack is surface-level and the crown still has sound structure under it, we can resurface rather than tear out. When it’s failing through, a rebuild is the honest answer, and we’ll show you why.
Is a rusted damper worth repairing or replacing?
Replacing is usually the better call once a damper is rusted through, since coastal humidity will keep eating at a repair. We’ll weigh it against the cost and tell you which option makes sense for how you use the fireplace.
Brands We Service in Lighthouse Point
We work with our brands from the established side of the trade: DuraFlex flexible lining systems, HeatShield resurfacing, Copperfield components, and Gelco caps. These are the products we know how to install correctly, and they’re what we bring to a Lighthouse Point repair rather than generic hardware-store parts. Once we’ve seen the flue, we’ll tell you what’s available and how long it takes to get on the schedule.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Lighthouse Point, FL
Here’s what chimney work typically runs in Lighthouse Point. Every figure is an estimate range, and the written estimate after we’ve inspected the chimney is what you actually pay.
| Service | Typical range in Lighthouse Point |
|---|---|
| Chimney sweep and inspection | $150 – $350 |
| Level 2 camera inspection | $200 – $450 |
| Chimney cap replacement | $250 – $650 |
| Chimney crown repair | $350 – $900 |
| Chimney flashing repair | $300 – $800 |
| Chimney liner installation | $1,800 – $4,500 |
| Dryer vent cleaning | $120 – $275 |
In Lighthouse Point, the chimney’s condition drives the price more than the size of the house. Salt corrosion and storm-driven water entry tend to stack damage – a failed crown leads to saturated masonry, which leads to flashing work – so catching it early keeps the number down. Nothing gets recommended beyond what the camera shows you, and the flat price is agreed before we book the work.
Neighborhoods We Serve in Lighthouse Point
We work throughout Lighthouse Point, and because it’s a compact town of single-family homes we can usually fold a visit into a normal day’s route. If you’re near the water, tell us when you call – the salt exposure along the canals and the Intracoastal tends to show up first on caps and damper hardware, so we’ll plan a little extra inspection time there. Homes set back off the main roads are just as easy to reach.
- Waterfront and canal-front homes along the Intracoastal
- Ranch and Florida-style residences off Lighthouse Point Drive
- Homes along Sample Road and the side streets north of it
- Quieter residential blocks inland from the canals
Service Area – Cities Near Lighthouse Point
Lighthouse Point sits between several towns we cover, so if you’re just over the line we can still help. We serve Deerfield Beach, FL to the north, Pompano Beach, FL to the south and west, Lauderdale-by-the-Sea, FL along the coast, and Oakland Park, FL further inland. The coastal conditions that drive chimney damage in Lighthouse Point follow the whole shoreline, so the work is much the same from town to town.
Serving Lighthouse Point, FL – Our Local Coverage Area
We serve Lighthouse Point and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Lighthouse Point
Yes, we cover the whole city, from the waterfront homes along the Intracoastal to the inland blocks off Sample Road. Call (866) 361-5813 and we’ll confirm a time that fits your schedule.
Some structural repairs, like relining or rebuilding a crown, may need a permit, so check with the city’s building department before work starts. HOAs here may also have rules on exterior cap styles and materials, so it’s worth a quick check with them too.
Lighthouse Point is close to our main service area, so scheduling is usually straightforward. Call (866) 361-5813. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday.
If your fireplace has sat idle through a coastal summer or you’ve spotted rust, a cracked crown, or a nest in the flue, don’t wait for the first cold night. Call (866) 361-5813 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’ll show you exactly what your chimney needs before anything gets priced.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lighthouse Point Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Jason Rhodes"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Yolanda Nash"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Michael Lawson