Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Lighthouse Point, FL
We provide independent Gelco service across Lighthouse Point, and the thing that sets our work apart here is what we look for first. In this town the trouble is rarely a soot-choked flue. It’s a Gelco cap, damper or crown that’s been quietly giving way to salt air and storm rain for months between the handful of nights a fireplace actually gets lit. We know Gelco cap, damper and crown hardware from the inside out, and we work on it without any manufacturer affiliation. That means we diagnose what your Gelco installation truly needs. Call (866) 361-5813 to set up an inspection and estimate.
Why Lighthouse Point Residents Choose Us for Gelco Service
Gelco gear shows up on plenty of the single-family homes here, and after enough inspections you learn its habits. The stainless multi-flue caps pit and their fasteners corrode. Top-mount dampers seize. Crown coatings crack. We read those failures quickly because we’ve handled the same hardware across Lighthouse Point, and we treat each one as a diagnosis rather than a sales opportunity.
We fit genuine Gelco caps, dampers and crown components where they’re the right match, and quality aftermarket stainless when an OEM part is discontinued or overpriced for the job. Independence matters. We’re a Gelco service provider on our own terms, not a factory outlet, so we recommend repair, reseal or recoating when that’s the honest answer and replacement only when an assembly is genuinely shot. Our technicians have up to 10 years of experience. Scheduling is straightforward and the price is confirmed in writing before any work starts.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Lighthouse Point
These are the Gelco failures we run into most across Lighthouse Point, and each one ties back to how homes and weather behave here:
- Pitted, corroded multi-flue caps. Salt-laden air off the Intracoastal and canals eats at stainless Gelco multi-flue caps and their fasteners over time. Once the pitting opens up, wind-driven summer rain finds its way straight down into a flue that hasn’t been lit in months.
- Top-mount dampers rusted shut. Gelco top-mount damper hardware seizes after long stretches of disuse, which is the norm here. A damper that won’t seal lets humid air keep migrating down the flue, and the rusted linkage can make it stick open.
- Cracked Gelco crowns and crown coatings. Intense summer thunderstorms and hurricane-season rain cycling crack crowns and their coatings, which opens a path for water to reach the firebox below.
- Nests packed against the screen. Idle Gelco-capped flues are prime real estate for birds and raccoons during South Florida’s long off-season. A nest blocks the flue and fouls the damper area, and it’s often the first thing you notice.
- Moisture-stained fireboxes and rusted hardware. When water has been getting past a cap or crown for a season, the first sign indoors is staining and rust rather than smoke problems. That’s the moisture trail we follow back to the Gelco component that’s failing.
Gelco Service in Lighthouse Point: What Local Conditions Mean for Your Equipment
Fireplaces in Lighthouse Point get lit maybe a handful of nights a year. That single fact reshapes everything about how Gelco service works on these homes. The recurring failure isn’t a creosote-loaded flue crying out for a sweep. It’s a rusted-shut top-mount damper or a hairline-cracked crown after months of idle disuse, with the humid marine air and storm rain doing the damage while the fireplace sits quiet. On a canal-side ranch home off the Intracoastal, a Gelco-capped flue that sat unused through the off-season typically turns up with a damper that won’t seal, a crown showing hairline cracks, or a bird’s nest pressed against the screen. The right response is to inspect the cap and crown, clear the nest and debris, free or replace the damper hardware, and recoat the crown so it sheds storm rain. For Gelco owners here, moisture control is the job. Soot is almost an afterthought.
Gelco Models & Products We Service in Lighthouse Point
We service the Gelco chimney equipment that most often needs attention in Lighthouse Point: stainless multi-flue chimney caps, top-mount damper assemblies, masonry chimney crowns and crown coatings, and single-flue rain caps with mesh spark screens. Each one fails in its own way, and each calls for a different fix.
Choosing parts is where the detail matters. We match genuine Gelco components where they’re the correct fit, and turn to quality aftermarket stainless when a part is discontinued or the OEM price doesn’t make sense for the repair. Our techs handle DuraFlex liner systems and HeatShield resurfacing when a flue needs restoration beyond the cap and crown. We install with practiced hands because these are professional-grade products that don’t tolerate guesswork.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Lighthouse Point
Pricing for Gelco service here depends on what we find. Cap cleaning and resealing, crown recoating, damper freeing or replacement, and a full sweep each land in a different place, and a job that combines two or three of them is priced as a whole rather than a pile of add-ons. The written estimate sets the final price.
| Gelco Service | Typical Estimated Range |
|---|---|
| Inspection with camera and photo report | Quoted per job in the written estimate |
| Cap cleaning, resealing or fastener repair | Quoted per job in the written estimate |
| Crown repair and recoating | Quoted per job in the written estimate |
| Top-mount damper freeing or replacement | Quoted per job in the written estimate |
| Cap replacement with quality stainless | Quoted per job in the written estimate |
Every estimate is free and includes a camera inspection with a photo report, so you see exactly what we see before you agree to anything. Call (866) 361-5813 for an exact quote, and we’ll tell you plainly when a repair can safely wait.
Serving Lighthouse Point, FL – Our Local Coverage Area
We serve Lighthouse Point and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Lighthouse Point
An inspection is the right first step, and a full sweep may not be necessary. When a flue sits idle, the concern shifts from soot to moisture, pests and hardware that’s seized. We inspect the cap, damper and crown, then tell you whether a cleaning is actually warranted. Call (866) 361-5813 to book an inspection.
Humidity and salt air corrode the damper hardware while it sits unused, and the linkage seizes or rusts in place. A damper that can’t seal lets more humid air down the flue. We free the mechanism or replace the hardware, whichever the part actually needs.
Not always, but it shouldn’t be ignored. A hairline crack lets storm rain reach the firebox over time, so it’s a repair to schedule rather than one to postpone for a season. We’ll assess how far the water has traveled and tell you honestly whether it can wait a few weeks.
Yes, a properly fitted Gelco cap with an intact spark screen keeps birds and raccoons out. If your screen is torn or a fastener is loose, the cap itself may just need repair. We clear the nest, inspect the damper area, and make sure the cap is sealed and secure. Call (866) 361-5813.
It’s a smart move here. Salt air speeds corrosion on stainless caps and damper hardware, and waterproofing the masonry around those components slows moisture intrusion. We’ll recommend it when the masonry shows it’s needed. Call (866) 361-5813 for a free estimate.
Service Areas Near Lighthouse Point
We also serve homeowners in Pompano Beach, Deerfield Beach, Lauderdale-by-the-Sea, Oakland Park and Wilton Manors. If you’re in one of these communities and need Gelco service, we’ll schedule an inspection. Our Lighthouse Point customers and neighbors throughout the area get the same camera inspection and honest assessment.
Book Your Gelco Service in Lighthouse Point Today
Call (866) 361-5813 to schedule your Gelco inspection in Lighthouse Point. The estimate is free, it comes with a camera inspection and photo report, and we’ll tell you plainly what needs doing now and what can safely wait. We answer 24/7. Fast dispatch from 7am to 7pm.
Written by the team at Stratford Chimney Sweep.