Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Pompano Beach?
Chimney liner and rebuild work in Pompano Beach typically runs from about $1,800 to $3,200 for a standard stainless liner installation, while a partial chimney rebuild usually lands between $2,500 and $6,500. Full top-to-bottom rebuilds and crown-to-flue restorations climb higher, often $7,000 to $15,000 or more depending on how much masonry has to come down and go back up. HeatShield resurfacing, which restores a damaged flue without tearing it out, is often the middle path at roughly $1,400 to $2,600.
Those are 2026 market ranges for this area, not a quote. Every chimney we look at is different, so the written estimate you get after an inspection is what sets your actual price. Estimates are free. Call (866) 361-5813 to book one.
Key Takeaways
- Standard liner install: roughly $1,800 to $3,200.
- HeatShield flue resurfacing: roughly $1,400 to $2,600.
- Partial rebuild (upper stack): roughly $2,500 to $6,500.
- Full rebuild: roughly $7,000 to $15,000 and up.
- The written estimate, not a phone number, sets the final price.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the numbers break down by line item. These ranges reflect what the work typically costs in Pompano Beach in 2026. Your project may combine several of these, and a full rebuild includes most of them at once.
| Work | Typical 2026 Range | What It Covers |
|---|---|---|
| HeatShield flue resurfacing | $1,400 – $2,600 | Restores a cracked or pitted clay flue without a full liner tear-out |
| Stainless flexible liner (DuraFlex) | $1,800 – $3,200 | Full-length insulated liner sized to the appliance |
| Liner for a taller or complex flue | $2,600 – $4,800 | Extra height, offsets, or a second flue |
| Chimney crown rebuild | $600 – $1,600 | New crown, proper slope, and cap |
| Partial rebuild (upper stack above roofline) | $2,500 – $6,500 | Rebuild of the portion of chimney exposed above the roof |
| Full chimney rebuild | $7,000 – $15,000+ | Full masonry replacement, relining, and new crown and cap |
| Gelco cap and top components | $250 – $700 | Multi-flue cap, spark screen, and hardware |
| Copperfield and Olympia components | $200 – $900 | Top plates, dampers, and connectors as needed |
| Famco ventilation and dryer vent work | $150 – $400 | Vent runs and terminations outside the chimney stack |
A few things move that total. A taller chimney needs more material and labor. A flue with multiple offsets or a sharp bend is harder to line than a straight run. And a rebuild that reveals rot behind the brick means the scope grows. We quote the pieces the inspection actually finds, so you’re paying for what the chimney needs, not a guess. The single biggest driver is whether the flue can be resurfaced with HeatShield or needs a full DuraFlex liner. Resurfacing saves money when the structure is sound enough to hold it. A liner makes sense when the flue is beyond resurfacing or needs a new conduit for a modern appliance.
If you’re near the beach blocks or up toward Sample Road, or out in the western stretches of Pompano Beach, the same pricing logic applies. Location within the city doesn’t change the work. What changes the price is the condition of your chimney.
What Affects Chimney Liner & Rebuild Pricing in Pompano Beach
Pompano Beach has a few conditions worth understanding before you get a bid. Our climate is warm and humid most of the year, and summer storms are a regular visitor. That combination shapes both what fails on a chimney and what it costs to make it right.
- Flue condition and lining type. A sound clay flue that just needs resurfacing can be handled with HeatShield at roughly $1,400 to $2,600. A flue that’s spalled or badly cracked calls for a full DuraFlex liner, which runs $1,800 to $3,200 or more. The condition of the flue is the first thing we check, because it sets the path.
- Chimney height and roof access. A taller stack above the roofline means more liner material, more scaffolding or ladder work, and more time. Height accounts for a meaningful share of the difference between a low bid and a real one.
- Number of flues. A single-flue chimney costs less than a two- or three-flue stack. Each flue is its own liner or resurfacing job, and each one has to be checked.
- Masonry damage found during a sweep. Warm, wet summers are hard on mortar and brick. When a sweep reveals loose mortar, spalling brick, or a failing crown, the rebuild scope grows. We inspect the whole stack so you know what’s there before any work starts.
- Weather and moisture at the top. A failing crown lets water into the masonry, and that water drives much of the rebuild work we do in this part of Florida. Rebuilding the crown and adding a proper cap protects the brickwork below it and cuts future repair bills.
- Appliance type and venting. A wood-burning fireplace, a wood stove, and a gas appliance each have different venting requirements. The liner has to be sized and rated for what you’re actually burning, and the quoted liner reflects that.
How to Save on Chimney Liner & Rebuild
The cheapest repair is the one you catch early. That’s not a sales line. A crown crack that gets sealed now is a fraction of the cost of a rebuild that happens when water has been working its way into the masonry for a few seasons. Here’s how to keep your total down.
- Get the sweep done before something fails. An annual inspection catches flue damage while it can still be resurfaced instead of rebuilt. That gap is the difference between a HeatShield job and a full liner or rebuild.
- Ask whether resurfacing is an option. Not every company offers HeatShield, but when the flue qualifies, it restores the flue without the cost of a full tear-out. Always ask if resurfacing could work before agreeing to a liner.
- Deal with the crown and cap. A properly sloped crown and a good Gelco cap keep water out of the masonry. That small investment protects the brick and flue below and postpones big repairs.
- Fix the cause, not just the damage. A rebuild that doesn’t address why the mortar failed will fail again. We look at venting, moisture, and the cap before quoting, so the repair holds.
- Book the inspection while you’re already thinking about it. We’ll give you a free estimate once we’ve seen the chimney, and you’ll know exactly what the work costs before you commit. Call (866) 361-5813 to schedule.
One more way to protect the whole picture: have your dryer vent cleaned at the same time. A clogged dryer vent is a fire risk in its own right, and we handle it as part of the same safety visit. It’s not a big cost, and it catches something your chimney inspection won’t.
Liner, Resurfacing, or Rebuild: Which Does Your Chimney Need?
Most people ask which path makes sense. The honest answer depends on what the flue and masonry look like when we inspect them. Here’s the short version.
- Resurfacing (HeatShield) makes sense when the flue is structurally sound but has cracks, gaps, or a rough interior that needs a smooth, sealed surface. It’s the lower-cost path at roughly $1,400 to $2,600, and it restores the flue without a tear-out.
- A full liner (DuraFlex) is the choice when the flue is badly damaged, improperly sized, or missing for a modern appliance. The typical range is $1,800 to $3,200, and it gives you a continuous, sealed conduit the whole way up.
- A partial or full rebuild is needed when the masonry itself has failed. Cracked or leaning brick, missing mortar, and a compromised crown mean the structure has to be rebuilt before any lining work makes sense. Partial rebuilds run $2,500 to $6,500; full rebuilds $7,000 to $15,000 and up.
We repair what we find, and a lot of the time the sweep inspection points clearly to one path. Because we carry both HeatShield and DuraFlex, we can quote the right method for your chimney rather than the one method we happen to install. If you’re looking at a rebuild, or just not sure, the Stratford Chimney Sweep team can walk you through the options on site.
Why Material Quality Changes the Price Tag
A liner is not a commodity, though some bids make it sound that way. DuraFlex flexible liner is professional-grade, and it requires trained, practiced handling to install correctly. Generic hardware-store components and the wrong liner for your appliance are a false economy: they can fail early, and replacing them costs more than doing it right once. We source our components from the established supply network, including Olympia Chimney, Copperfield, Gelco, and Famco, so the parts behind your chimney are built for the job.
The same holds for resurfacing. HeatShield is a specific system, not a generic patch, and applying it well takes the right preparation and technique. It’s a repair method most cleaning-only crews can’t offer, which is why some bids skip straight to a liner replacement. We keep both paths open because the right repair for your chimney shouldn’t depend on what a company happens to carry.
Our technicians have up to 10 years of experience with this work, and they handle sweeping, repair, and dryer vent cleaning as one connected scope. When a sweep turns up a problem, the same crew can quote and take care of it. No second contractor to find and vet, no handoff between a cleaning company and a repair company.
What Happens When You Call
We start with an inspection. We look at the flue, the masonry, the crown, and the cap, and we tell you plainly what’s there. Then we give you a written estimate for the work the chimney actually needs, with the line items broken out. You’ll see where the money goes and why. If resurfacing can save you the cost of a liner, we’ll tell you. If a rebuild is the right call, we’ll explain what drove that.
Same-Day Repair
When the problem is something we can address on the visit, we do. Findings from a sweep can often be quoted and turned into a repair plan without a second appointment. For anything larger, we schedule the work and keep you informed along the way. Same-day service is available depending on the scope and the day.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Pompano Beach?
A standard stainless chimney liner in Pompano Beach typically costs $1,800 to $3,200 installed in 2026. Taller flues, multiple offsets, or a second flue push that toward $2,600 to $4,800. Call (866) 361-5813 for an exact quote. Estimates are free.
Is it cheaper to resurface the flue or install a new liner?
HeatShield resurfacing usually costs less, at roughly $1,400 to $2,600, and it can restore a flue that’s cracked or damaged without a full tear-out. A DuraFlex liner at $1,800 to $3,200 is the right path when the flue is beyond resurfacing. We check which applies before quoting, so you’re not sold a liner you don’t need. Call (866) 361-5813 for a free estimate.
How much does a chimney rebuild cost in Pompano Beach?
A partial rebuild of the upper stack typically runs $2,500 to $6,500, and a full chimney rebuild runs $7,000 to $15,000 or more. The spread comes down to how much masonry has to come down, whether the flue needs relining, and the height of the stack. Call (866) 361-5813 for a written estimate on your chimney.
Can I just cap the chimney and skip the repair?
Capping alone doesn’t fix a failed flue or cracking masonry, and it can trap moisture if the interior is already damaged. A proper cap is part of the repair, not a substitute for it. We’ll tell you plainly whether a cap is all you need or whether the flue or masonry needs work. Call (866) 361-5813 with questions. Estimates are free.
How long does a chimney liner or rebuild take?
A liner installation is usually a one-visit job. HeatShield resurfacing is also typically done in a single visit. A partial rebuild can take a few days, and a full rebuild takes longer depending on the scope and weather. We’ll give you a realistic timeline with your estimate when you call (866) 361-5813.
Get a Free Estimate in Pompano Beach
Pricing a chimney repair without seeing the chimney is guesswork, and we’d rather not guess with your money. Call (866) 361-5813 for a free estimate. Our phones are answered 24/7, and we have fast dispatch from 7am to 7pm, Sunday through Friday. We’ll inspect the flue and masonry, tell you what the chimney needs, and put the price in writing so you know exactly what you’re paying before any work begins.
Whether it’s a HeatShield resurfacing, a DuraFlex liner, or a full rebuild, you’ll get a straight answer from our team and a clear path to a safer chimney. Reach out to the team at Stratford Chimney Sweep and let’s take a look.
Pricing reflects the Pompano Beach market as of 2026. Stratford Chimney Sweep offers free estimates. Call (866) 361-5813.
Written by the team at Stratford Chimney Sweep.
What Our Customers Say
"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Craig Schaefer"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Yolanda Nash"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Jason Rhodes